S-Bobbin, Rotor Attachment Complete Hardware Kit

S-Bobbin rotor attachment complete hardware kit for floating 2-piece rotors

• Corrosion resistant, allows secure mounting, and smooth expansion and contraction throughout heat cycles

• This complete kit includes enough hardware for two rotors.

S-Bobbin (A): 4.35mm - 4.30mm flange thickness, 0.4mm float

S-Bobbin (B): 4.85mm - 4.80mm flange thickness, 0.4mm float

S-Bobbin (C): 5.05mm - 5.00mm flange thickness, 0.4mm float

S-Bobbin (D): 5.65mm - 5.60mm flange thickness, 0.2mm float

S-Bobbin (H): 5.55mm - 5.50mm flange thickness, 0.4mm float

S-Bobbin (J): 5.65mm - 5.60mm flange thickness, 0.4mm float

S-Bobbin (L): 5.65mm - 5.60mm flange thickness, 0.7mm float

S-Bobbin (M): 6.35mm - 6.30mm flange thickness, 0.2mm float

S-Bobbin (P): 6.35mm - 6.30mm flange thickness, 0.4mm float

- Includes:

• Aerospace grade Geomet coated bolts
• Washers
• Locking nuts
• Stainless steel S-Bobbins

- Assemble torque specs: 10.5 lbf-ft / 14 Nm

Replacement of AP CP2494 Type "Float in disc" standard bobbin hardware

We recommend using new hardware every time when replacing rotor rings. If there is no visible wear, bobbins can be reused. A bolt kit that includes bolts, locking nuts, and washers is available for purchase.

Part Number: PRH.Sx.8/10/12.CK