Paragon PPS330 Titanium Brake Pad Shims

Paragon PPS330 Titanium Pad Shims

Great heat management upgrade to improve braking performance for track and race applications. Paragon titanium pad shims are made of high quality Grade 5 titanium (6AL-4V / ASTM B348). Fits between the brake pads and calipers, and can act as an effective thermal barrier due to the significantly lower thermal conductivity of titanium.

Reduce heat transfer from the brake pads to the calipers and brake hydraulic system to lower the operating temperature. When the rotors and pads are hot, heat transfer via the caliper pistons to the calipers and brake fluid may lead to fluid overheat and brake fade. Fluid fade will lead to soft brake pedal and affect modulation, and is dangerous when there is sudden loss of braking power at the track.

Lower long term maintenance cost by protecting the caliper seals, dust boots, and brake fluid. Excessive heat will deteriorate these components a lot faster and lead to unnecessary replacement cost, plus wasted track time. Boiled fluid needs to be replaced after every track day.

• Improved safety by help preventing brake fade and failure

• Extend the life of brake components and lower long term maintenance cost

• Material: Grade 5 titanium (6AL-4V / ASTM B348)

• Thickness: 0.5mm (0.02")

• Set of 4 (axle set)

Common applications: 

• 04-17 Subaru WRX STI (GDB / GRF / GVF / VAB) rear

• Subaru BRZ Performance Package / Scion FR-S / Toyota 86 w/ OEM Brembo calipers rear

• Subaru BRZ tS rear

• Mitsubishi EVO 5-9 (CP9A / CT9A) Brembo rear

• Nissan 350Z (Z33) Brembo / Infiniti G35 Coupe Brembo rear

• Paragon PA026 calipers

• AP Racing CP5119 / CP5316 / CP5317 calipers (CP5119D50 Pads)

• StopTech ST-22/STR-22 calipers

Part Number: PPS0330.01.050