Paragon 378x34mm Replacement Rotors for various TCR applications - Sprint Version - Front Pair

Paragon 378x34mm Replacement Rotors for various TCR applications - Sprint Version - Front

These rotor rings (friction rings) are direct fit for the original equipped aluminum hats on various TCR vehicles. Sold in pairs.

Comes with new rotor attachment hardware kits (enough for 2 rotors) and assembly instructions for a complete rebuild.

Paragon Performance Rotor Ring offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor to achieve greater thermal capacity and increased resistance to cracking under harsh track condition.

Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.

Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotor rings went through rigorous quality control procedures and inspections to ensure the rotor rings are fit for their purposes. The fully floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Optimized the balance between mass and thermal capacity, our rotors improves overall handling by saving unsprung weight.

• 72 Directional ventilation vanes for optimal thermal capacity and increased resistance to cracking. Increased cooling efficiency for extreme race conditions

• Fully-floating 2-piece design

• Minimizing brake fade & judder during extended sessions

• Rotor size: 378mm x 34mm

• Sprint version with 19.5mm air vane gap

• Radial depth (D): 54mm

• Weighs 19.7 lbs (8.95 kg)

• Rotor to hat mounting system: T-Bobbbin (Short) - 12-bolt

Fits:

• Audi RS3 LMS TCR*
• Seat Leon TCR*
• Cupra TCR*
• VW Golf GTI TCR*
• Alfa Romeo Guilietta TCR
• Lada Vesta TCR
• Opel Astra TCR
• Renault Megane TCR

*Replacement aluminum hats available

Paragon part number: PRK.047.378.340.24760.15.01.S.F

Cross Reference:

• VW 8S6615301 / 8S6615302
• Pagid ED378340101 / ED378340201
• PFC 378.34.0054.01/02

Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions.